SSD Data Recovery
No.1 SSD Recovery Service Here
SSD Recovery Service
SSD Data Recovery- 3,000 -5,000 BD Taka – Basic Software Data Recovery
- 5,000-15,000 BD Taka- Advanced File System Damage
- 10,000-18,000 BD Taka- Damaged PCB
- 50,000-80,000 BD Taka- Firmware Corruption
- 18,000-40,000 BD Taka- Bad Sectors/Read Errors
- 5,000-10,000 BD Taka – Deleted Files/Reformatted/Reimaged***
- 50,000-1,50,000 BD Taka- Hardware Fault (e.g damaged controller chip)
SSD Recovery Service Advanced Package
SSD Data Recovery- 3,000 -5,000 BD Taka – Basic Software Data Recovery
- 5,000-15,000 BD Taka- Advanced File System Damage
- 10,000-18,000 BD Taka- Damaged PCB
- 50,000-80,000 BD Taka- Firmware Corruption
- 18,000-40,000 BD Taka- Bad Sectors/Read Errors
- 5,000-10,000 BD Taka – Deleted Files/Reformatted/Reimaged***
- 50,000-1,50,000 BD Taka- Hardware Fault (e.g damaged controller chip)
Solid State Drive (SSD) Data Recovery in Bangladesh
1.Firmware Corruption.I.TECH DATA RECOVERY CLEAN ROOM MUMBAI INDIAssd-drive-2SSD-Flash-Drive-Data-Recovery-Retrieval-Copy-542×292
2.Power Surge
3.Faulty Controller Chip.
4.Liquid Spill/Flood Damage
5.Printed Circuit Board (PCB) Damage.
6.Damaged SATA or ZIF Connector.
7.Detected as wrong size (e.g Intel 8 MB)
8.Accidental Reformatting/Deletion of data.
9.Bad Sectors/CRC/Unreadable Sectors.
10.File System Corruption.
11.Operating System Not booting.
12.Not Detected in BIOS
If your SSD has stopped working and you cannot access the data, the best thing to do is to turn it off to prevent further damage. SSD drives may fail due to many reasons (the most common causes are listed above).
We can help you with ANY brand of SSD.
We use specialised professional hardware and software to either temporarily repair the SSD to extract the data or if needed, remove all of the memory chips, copy the data from each memory chip and extract the data using specialised hardware, adapters, readers and software. We have the capability to help you with your faulty SSD.
The time required to recover data from a Solid State Drive may take 1-2 days up to several months for very difficult cases. The average amount of time is 5-10 days and for more difficult cases, the average is 2-4 weeks on average weeks. Instead of giving up – our team will research a new solution to help you if required and it may take much longer for difficult cases.
If you would like a free quote within 24 hours, you will need to let us examine your SSD to confirm the problem and offer you a confirmed quote before we begin our work.
We offer several SSD data recovery services.
3,000 -5,000 BD Taka – Basic Software Data Recovery
5,000-15,000 BD Taka- Advanced File System Damage
10,000-18,000 BD Taka- Damaged PCB
50,000-80,000 BD Taka- Firmware Corruption
5,000-10,000 BD Taka – Deleted
Files/Reformatted/Reimaged*** 50,000-1,50,000 BD Taka- Hardware Fault (e.g damaged controller chip)
Restore Your Data From Any SSD Drive – An In-depth Guide
When it comes to data storage, solid-state drives are far superior to traditional hard disk drives. However, this doesn’t mean that SSDs can never fail. In fact, even the most reliable computer hardware will at some point stop working or become corrupted. This is why it’s so important to back up your data regularly and store it in a separate location from your primary hard drive. If you use an SSD as your primary drive and aren’t ready to retire it yet, then follow this guide to learn how to restore your data from any SSD drive.
What to do When Your SSD Fails
If your SSD drive fails, or if you want to upgrade to a faster computer using a new SSD, you’ll need to recover the data from your old SSD to a new one. Here are some steps you can take to recover your data from any SSD drive when your old SSD fails.
Copy The Data From Your Old SSD to a New One
The first thing you can try to do is copy the data from your old SSD to a new one. If you don’t have sufficient space on your new SSD to store all your data, you can copy just your most important files by following these steps: Back up your data from your old SSD. Use a program like Carbon Copy Cloner or a drive cloning tool to clone your old SSD to a new one. When cloning your old SSD, only select the data you want to copy. This will save you time and space on your new SSD.
Restore from Backup on Another Drive
If your old SSD fails, you can use a new SSD to restore the data from your existing backup. Make sure that you copy your data to a new drive or to an external drive so that you don’t overwrite your current data. After you restore your data to the new drive, you can delete the old backup data. If you’re restoring from a Time Machine drive, you’ll need to use Migration Assistant to restore the data from your Time Machine drive to your new SSD.
Recover data from the SSD using Data Recovery Software
If your old SSD fails, you can try to recover data from the SSD using data recovery software. There are a number of free and paid software programs available online that can help you recover your data from any SSD drive. If you’re unsure which software program to use, you can consult an IT support provider for help.
Conclusion
When it comes to data storage, solid-state drives are far superior to traditional hard disk drives. However, this doesn’t mean that SSDs can never fail. In fact, even the most reliable computer hardware will at some point stop working or become corrupted. This is why it’s so important to back up your data regularly and store it in a separate location from your primary hard drive. If you use an SSD as your primary drive and aren’t ready to retire it yet, then follow this guide to learn how to restore your data from any SSD drive.